A radial slide bearing’s clearance constitutes the difference between the bearing’s internal diameterand the shaft’s diameter. During hydrodynamic operating conditions, the clearance is directly decisive for the forming of the oil film. It is the function of the oil film to separate the shaft and thebearing surface from each other, so that metal contact is avoided.
Another purpose of the clearance is to accommodate changes in geometry, which can be the consequence of an increased or reduced temperature in the surroundings. It is not so unusualthat the shaft expands more than the bearing during increases in temperature. The causes reduced clearance.
Generally, for high loaded, slowly moving bearings a small clearance is chosen. For bearings that havelight loads and move rapidly a larger clearance is chosen. From experience, 0.3 – 5 ‰ of the shaft diameter is recommended. See the figure below for the dependence of the bearing clearance of the sliding velocity.
According to previous reasoning, the clearance is dependent on both the load and the sliding velocity. Other parameters that affect the play are, for example, the type of lubricant and the operating temperature. The figures below illustrate the bearing clearance dependence on the loading. At the same time, the sliding velocity is affected.


